Navigation

Shop

Return to Previous Page
Description

Description

Unmatched leg room and bathing width, in a 36” whirlpool bath, the 6036 Elite whirlpool bathtub has a deeper water depth which is a result of placing the overflow on the top of the bathtub’s deck and extra bathing width is achieved by decreasing the bath’s top deck and adding the space into the bathing well. This tub has two sloping arm rests and additional leg room by sculpturing the foot end of the tub with two gentle curves. Watertech’s exclusive top overflow design allows all Elite baths to be filled within 2 inches of the top of the bathtub insuring the bather gets an extra deep full body massage while a Jacuzzi- style bathtub with a standard side overflow has a water bathing level 4” – 6” inches below the top of the bathtub. All Elite models come with a free Top Overflow/Drain assembly in your choice of finish: Brushed Nickel, Oil Rubbed Bronze (often called Venetian Bronze), Chrome or Polished Brass). Please specify your choice of finish when ordering.

The water jets are fully directional and the jet’s scalloped face can be rotated allowing the bather to increase or decrease the water flow and pressure from each jet. A three speed control (high-medium-low) is standard on all combo baths giving the bather complete control of the water flow and pressure from all the water jets simultaneously. For your comfort all back and neck jets are recessed in all Watertech whirlpools and combination bathtubs. The water lines on combo baths are rigid PVC, U.L. certified for 100% drainage assuring a clean and sanitary massage experience each and every time the bath is used. A free pulsating jet is provided with each combo bath and can be easily interchanged with any water jet in a matter of seconds. The pulsating jet is a feature usually found only in hot tubs and spas. The tub’s measurements are 60” in length and 36” in width.

The pump, variable speed heated air blower and jacuzzi style bathtub shell all have a Lifetime Warranty! Watertech’s optional Fill and Drain faucet is extremely popular on all our baths and only available from Watertech.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “6036 Elite Whirlpool Bathtub”

Specifications
Specifications
  • Size: 60" x 36"
  • FREE! Pulsating Jet - Interchangeable with any jet neck, back, foot, etc. ($55.00 Value)
  • Pump: 9 amp Lifetime Warranty
  • Hydrotherapy Spa Jets: 11
  • Operating Level: 65 gallons
  • Includes on/off switch
  • Includes 3 speed pressure controller (A $75 value)
  • Plumbed completely with rigid schedule 40 PVC pipe (no flex hose)
  • Shipping Weight: 150 lbs; please call for shipping rates to your location
  • An extended spout is needed if spout is wall mounted
  • Drain included in tub price - specify finish
  • Tub shown with optional polished brass trim

Specification Sheets
Shipping & Receiving

Shipping

At WaterTech Whirlpools we ship our quality tubs across the United States using only the top freight lines to ensure your whirlpool tub gets to you on time and in the same condition as when it left our factory floor. 

The following are normal shipping times; please call for current shipping rates (subject to change).  Please note that shipping is NOT included in the price of each tub.  Regular delivery time is 3 weeks from the date we receive your order.

Our Quick Ship option allows your tub to leave our factory floor within 5 business days from the date we receive your order.   Please call 1-800-289-8827 for our Quick Ship service.

 

 

Precautions & Installation Tips

  • Do not lift or carry the whirlpool tub by the supply or return pipes - they could break or spring leaks.
  • You must install a mortar bed beneath your tub to meet code and warranty requirements.
  • An access opening large enough to service your pump must be installed to meet code requirements.
  • Do not frame your whirlpool tub enclosure until you have your tub on the job site.
  • Carpenters, plumbers, and tile installers should verify all dimensions to ensure that the tub enclosure is properly sized for your whirlpool tub.
  • Detailed installation instructions are available on the installation page of this site.
  • Re-test your whirlpool tub for leaks or construction damage before you enclose your tub.

 

Receiving

Reliable trucking (freight) companies have been selected by WaterTech Whirlpools to deliver each new Whirlpool Bath. WaterTech Whirlpools packages each bath individually to ensure safe delivery to each customer. The freight carrier will notify customer and schedule a delivery time after the bath leaves our manufacturing facility. Call WaterTech Whirlpools if you have any questions (i.e. price, product, technical, shipping etc.) Phone 1-800-289-8827, Fax: 423-926-6438 email at info@watertechtn.com.

INSPECTION AND CLAIMS PROCEDURE: Follow the steps below to eliminate any questions about who is responsible for visible or concealed damage that may have occurred in shipping. Examine the shipping box for signs of damage or mishandling, i.e. staples pulled loose, flaps unglued, punches to the box, severe indentations, or crushed corners. If the box is damaged, the delivery person and receiving person / Consignee must note the damage to the box on delivery paperwork before opening the box. Open the box and inspect the tub for damage. If damage is found, call WaterTech Whirlpools at 1-800-289-8827 before accepting tub. Minor defects such as scuffs, scratches, etc… can be easily taken care of by one of our service people. All issues need to be resolved before signing delivery paperwork.

CONCEALED DAMAGE: WaterTech Whirlpools allows the consignee / owner no more than 48 hours from time of receipt to inspect and report any concealed damage (i.e. leaks, broken pipes, etc…) or shortages of merchandise ordered (i.e. heater, drain, jet trim, etc…). Report concealed damage and shortage to Americas Best Whirlpools 1-800-289-8827.

FAILURE OF THE CONSIGNEE TO INSPECT AND REPORT ANY CONCEALED DAMAGE WITHIN THE 48 HOUR PERIOD PLACES FULL RESPONSIBILITY FOR ANY CONCEALED DAMAGE ON THE CONSIGNEE.

PRE-TEST YOUR TUB: You must pretest your tub for leaks within 48 hours of receipt. WaterTech Whirlpools tubs go through rigorous testing for plumbing leaks and proper operation prior to shipping, but as a secondary precaution, the tub must be re-tested for leaks and proper operation within the allotted 48 hours and before installation. Test your tub in a location that will not be damaged by spilled water such as a basement, driveway, or a garage. Pre-testing your tub allows you to find any plumbing connections that might have worked loose during shipping.

HOW TO PRE-TEST YOUR TUB: Place your tub on a firm flat surface, make sure top of tub is level in all directions. Tape over the drain. Fill with water to 1 or 2 inches above the highest jet. Plug the motor into a GFCI protected outlet, and with the pump running, check all pipes and fittings for moisture. If no leaks are found, remove tape over drain and check for proper drainage. If all is correct, you may continue the Installation process.

IF ANY PROBLEMS ARE DISCOVERED DO NOT INSTALL THE TUB UNTIL YOU HAVE SPOKEN WITH A WATERTECH WHIRLPOOLS REPRESENTATIVE AT 1-800-289-8827

Related Products

6032 Elite Whirlpool Bathtub

Rating:
5.00 out of 5
A luxurious acrylic whirlpool bath, the Elite is an excellent bath for restricted spaces. When a fiberglass tub/shower needs replacing, the 60x32 Elite is the perfect replacement tub. The extra deep bathing area has Watertech’s exclusive Top Overflow design that allows for a minimum of 20% more water depth than a standard bath with a side wall overflow. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$1,743.00

6464 Elite Whirlpool Bathtub

Rating:
5.00 out of 5
The perfect jetted bathtub for corner installation. We also have two additional models available for corner installation, the 6262 and the 606CW. This two person jacuzzi style bath has distinctive seating areas and back jet arrangements for optimal neck and back massage. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$2,599.00

6032 BW Whirlpool Bathtub

When remodeling, the 6032BW acrylic whirlpool bathtub fits or replaces the standard fiberglass one piece unit found in most homes that occupy a 60 X 32 space. This tub has two arm rests and a soap dish designed into the acrylic. Its 5 foot length and 32 inch width make it a perfect replacement for any standard size tub. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$1,186.00

7244 Elite Whirlpool Bathtub

This single person bathtub provides a powerful full body massage from the soles of your feet to your back and neck area. 5 jets for the back and neck and 6 jets massage the torso, legs, knees, feet, hips etc. The outside dimensions are 72” in length and 44” in width giving the bather an extremely large bathing area that will accommodate individuals of all sizes. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$2,589.00

6042 GW Whirlpool Bathtub

A very popular jacuzzi style one person whirlpool bath! We have 4 models of the 6042 jetted tubs: the 6042 Elite, 6042EOW (oval shape), 6042 GW, and the 6042 SW. The 6042 GW is the only 6042 whirlpool that has two clear acrylic grab rails designed into the acrylic tub. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$1,430.00

6042 SW Whirlpool Bathtub

Rating:
5.00 out of 5
Wide tapered arm rests and a sculptured seating area, in the floor of the tub, cradle your body. A 5’ tub with a large deck area where a faucet can be installed. This jetted tubs rectangular shape is perfect for those wanting to place a shower over it. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$1,400.00

6043 Whirlpool Bathtub

By adding 1” to the width of a 60” long and 42” wide tub, we have created a very popular 60 X 43 two person tub that doesn’t require excessive width in the bathroom. A narrow top deck, approximately 2” wide, is designed so the internal bathing area could be enlarged to comfortably seat two people sitting face to face. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$1,900.00

6048 Whirlpool Bathtub

This classic design accommodates two bathers sitting side by side. 10 jets massage the bather’s feet, legs, hips, knees, back and neck. Dual stacked back jets and sculptured arm rests are amenities that provide comfort and pleasure to each bather. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$1,549.00

6060 Whirlpool Bathtub

Rating:
5.00 out of 5
This extra deep, two person tub has a roomy open shape with eight adjustable jets. All of the jets are recessed and a convenient seat compliments this bath. All back and neck jets are recessed in all whirlpool, combination and air baths. A free pulsating jet, interchangeable with any jet in the tub, is provided with each bath and can be changed out in a matter of seconds and delivers a rotating - pulsating massage action usually only found in hot tubs and spas. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$1,698.00

7243 Whirlpool Bathtub

Rating:
4.50 out of 5
A great two person whirlpool, the 7243 allows bathers to face each other. The bathtub's rectangular shape also allows it to be incorporated into a shower design. This jacuzzi-style jetted tub has an exceptional bathing well that is wide with lots of leg room. Note: Prices do not include freight.  Please call for pricing. 
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$2,067.00
Back to top
Follow by Email
Facebook
Facebook
Contact us

We would love to help you answer all your questions. Please fill out the form below and we will get back to you ASAP or call us at: 1 (800) 289-8827.

Questions, issues or concerns? I'd love to help you!

Click ENTER to chat