Navigation

Shop

Return to Previous Page
Description

Description

A great two person whirlpool that allows bathers to face each other. The bathtubs rectangular shape also allows it to be incorporated into a shower design. This jacuzzi-style jetted tub has exceptional bathing well width and leg room. A flat deck area at each end of the tub is an excellent place for mounting a Roman Tub Filler and Hand Shower. The tub has a center drain location. The 7243 whirlpool bathtub is only 1” wider than a standard 72”x42” whirlpool. Three back jets massage each bather. Two jets provide hydrotherapy for the feet. Four additional jets massage legs, hips, knees and upper body. Each jet eyeball is directional so the bather can select the area they want the jet to massage. The scalloped face of the jet can be rotated to increase or decrease the pressure and flow from the jet.

A three speed control (high, medium or low) is standard on all WaterTech whirlpools and allows all jets pressure and flow to be controlled simultaneously. All neck and back jets are recessed in all whirlpool, combination and air baths. A free pulsating jet, interchangeable with any jet in the tub, is provided with each bath and can be changed out in a matter of seconds and delivers a rotating – pulsating massage action usually found only in hot tubs and spas. Watertech’s optional Fill and Drain faucet is extremely popular on all our baths.

WaterTech bathtubs are constructed with a galvanized steel base (no wood – no plastic) to insure the floor of the bath will never flex or warp. Rigid PVC waterlines are U.L. certified for 100% drainage, insuring a clean and sanitary massage experience with every bath. There is a Lifetime warranty on the pump and 72×43 acrylic bathtub shell. For those wanting even a deeper water depth, the bathtub can be ordered with an optional press-flow drain/overflow assembly that increase water depth an additional 3.”

Reviews (2)

2 reviews for 7243 Whirlpool Bathtub

  1. Rated 5 out of 5

    Subject: drains vs. pumps
    Hi Watertech,
    We are interested in your 7243 tub, but we are tucking it into a corner in our new house against two outside walls. The pump needs to be on a non-wall tub end, and the drain opposite an outside wall. Do you ever reverse the pump locations to accommodate a need like ours?
    Bill M. in California
    Response from Watertech
    Yes, the pump can be relocated, just send us a sketch showing where you want the pump. If we put it on the opposite end near the foot jet, it will stay under the lip of the tub, anywhere else it will stick out past the lip of the tub.
    Have a nice day,
    Shane
    Response from Bill M. in California
    Shane, thank you for your response. We appreciate the option to change the pump location and not rearrange our floor plan. Our sketch indicates where we need the pump.

  2. Rated 4 out of 5

    I recently ordered and received your model 7243 whirlpool tub (order #xxx). I’d like to start by saying the tub is installed and runs great. The heater is something I’d recommend to anyone. We really enjoy it. However, the main reason for sending this email is to thank two individuals for their customer service efforts. I only know them by their first name so I’d like to thank Karen and Mo. When I needed something they were able to assist me and give me advise that made my experience with Watertech worth recommending to others.

Add a review

Specifications
Specification Sheets
Specifications
  • Size: 72" x 43"
  • FREE! Pulsating Jet - Interchangeable with any jet neck, back, foot, etc. ($55.00 Value)
  • Pump: 9 amp Lifetime Warranty
  • Hydrotherapy Spa Jets: 12
  • Operating Level: 65 gallons
  • Includes on/off switch
  • Includes 3 speed pressure controller (A $75 value)
  • Plumbed completely with rigid schedule 40 PVC pipe (no flex hose)
  • Shipping Weight: 177 lbs; please call for shipping rates to your location
  • Tub shown with optional polished brass trim
Shipping & Receiving

Shipping

At WaterTech Whirlpools we ship our quality tubs across the United States using only the top freight lines to ensure your whirlpool tub gets to you on time and in the same condition as when it left our factory floor. 

The following are normal shipping times; please call for current shipping rates (subject to change).  Please note that shipping is NOT included in the price of each tub.  Regular delivery time is 3 weeks from the date we receive your order.

Our Quick Ship option allows your tub to leave our factory floor within 5 business days from the date we receive your order.   Please call 1-800-289-8827 for our Quick Ship service.

 

 

Precautions & Installation Tips

  • Do not lift or carry the whirlpool tub by the supply or return pipes - they could break or spring leaks.
  • You must install a mortar bed beneath your tub to meet code and warranty requirements.
  • An access opening large enough to service your pump must be installed to meet code requirements.
  • Do not frame your whirlpool tub enclosure until you have your tub on the job site.
  • Carpenters, plumbers, and tile installers should verify all dimensions to ensure that the tub enclosure is properly sized for your whirlpool tub.
  • Detailed installation instructions are available on the installation page of this site.
  • Re-test your whirlpool tub for leaks or construction damage before you enclose your tub.

 

Receiving

Reliable trucking (freight) companies have been selected by WaterTech Whirlpools to deliver each new Whirlpool Bath. WaterTech Whirlpools packages each bath individually to ensure safe delivery to each customer. The freight carrier will notify customer and schedule a delivery time after the bath leaves our manufacturing facility. Call WaterTech Whirlpools if you have any questions (i.e. price, product, technical, shipping etc.) Phone 1-800-289-8827, Fax: 423-926-6438 email at info@watertechtn.com.

INSPECTION AND CLAIMS PROCEDURE: Follow the steps below to eliminate any questions about who is responsible for visible or concealed damage that may have occurred in shipping. Examine the shipping box for signs of damage or mishandling, i.e. staples pulled loose, flaps unglued, punches to the box, severe indentations, or crushed corners. If the box is damaged, the delivery person and receiving person / Consignee must note the damage to the box on delivery paperwork before opening the box. Open the box and inspect the tub for damage. If damage is found, call WaterTech Whirlpools at 1-800-289-8827 before accepting tub. Minor defects such as scuffs, scratches, etc… can be easily taken care of by one of our service people. All issues need to be resolved before signing delivery paperwork.

CONCEALED DAMAGE: WaterTech Whirlpools allows the consignee / owner no more than 48 hours from time of receipt to inspect and report any concealed damage (i.e. leaks, broken pipes, etc…) or shortages of merchandise ordered (i.e. heater, drain, jet trim, etc…). Report concealed damage and shortage to Americas Best Whirlpools 1-800-289-8827.

FAILURE OF THE CONSIGNEE TO INSPECT AND REPORT ANY CONCEALED DAMAGE WITHIN THE 48 HOUR PERIOD PLACES FULL RESPONSIBILITY FOR ANY CONCEALED DAMAGE ON THE CONSIGNEE.

PRE-TEST YOUR TUB: You must pretest your tub for leaks within 48 hours of receipt. WaterTech Whirlpools tubs go through rigorous testing for plumbing leaks and proper operation prior to shipping, but as a secondary precaution, the tub must be re-tested for leaks and proper operation within the allotted 48 hours and before installation. Test your tub in a location that will not be damaged by spilled water such as a basement, driveway, or a garage. Pre-testing your tub allows you to find any plumbing connections that might have worked loose during shipping.

HOW TO PRE-TEST YOUR TUB: Place your tub on a firm flat surface, make sure top of tub is level in all directions. Tape over the drain. Fill with water to 1 or 2 inches above the highest jet. Plug the motor into a GFCI protected outlet, and with the pump running, check all pipes and fittings for moisture. If no leaks are found, remove tape over drain and check for proper drainage. If all is correct, you may continue the Installation process.

IF ANY PROBLEMS ARE DISCOVERED DO NOT INSTALL THE TUB UNTIL YOU HAVE SPOKEN WITH A WATERTECH WHIRLPOOLS REPRESENTATIVE AT 1-800-289-8827

Related Products

6036 Elite Whirlpool Bathtub

Unmatched leg room and bathing width, in a 36” whirlpool bath, the 6036 Elite whirlpool bathtub has a deeper water depth which is a result of placing the overflow on the top of the bathtub's deck and extra bathing width is achieved by decreasing the bath's top deck and adding the space into the bathing well. This tub has two sloping arm rests and additional leg room by sculpturing the foot end of the tub with two gentle curves. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$2,096.00

6048 Elite Whirlpool Bathtub

Designed for two bathers who would like to sit in a comfortable whirlpool, facing each other. 12 jets power the whirlpool system. Each bather has three neck and back jets and 1 foot jet. 4 additional jets provide a full body massage of the torso, hips, legs, ankles, knees etc. The bathing area is wider than any other 48” jacuzzi style whirlpool and the leg room cannot be matched in any other two person whirlpool bath 60” in length. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$2,632.00

6464 Elite Whirlpool Bathtub

Rating:
Rated 5.00 out of 5
The perfect jetted bathtub for corner installation. We also have two additional models available for corner installation, the 6262 and the 606CW. This two person jacuzzi style bath has distinctive seating areas and back jet arrangements for optimal neck and back massage. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$2,599.00

6032 Ultra Whirlpool Bathtub

A beautiful bathtub for the smallest of spaces! Watertech manufactures three models that are 60” in length and 32” in width. These are the 6032BW, 6032 Ultra and our exclusive top overflow bath the 6032 Elite which provides the deepest water depth of any model 60” long and 32” wide. All WatertTech 6032 baths are excellent choices for individuals wanting to replace an existing fiberglass, one piece tub/shower with an acrylic jacuzzi-style whirlpool. If a shower is desired, it can be incorporated into a shower/bath design in all our models. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$1,330.00

6036 BW Whirlpool Bathtub

Four inches wider than a standard jacuzzi style whirlpool bathtub. This jetted tub’s dimensions are 60 X 36. Perfectly suited for narrow spaces and one person. Three back jets provide a powerful back massage and four jets massage the legs, hips, knees and torso. Two jets provide the feet, ankles, toes and soles of the feet a comforting water massage. The top deck of the tub has two sculptured areas designed to conveniently hold soap, shampoo, conditioner etc. Note: Prices do not include freight. Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$1,315.00

6048 Whirlpool Bathtub

This classic design accommodates two bathers sitting side by side. 10 jets massage the bather’s feet, legs, hips, knees, back and neck. Dual stacked back jets and sculptured arm rests are amenities that provide comfort and pleasure to each bather. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$1,549.00

6060 Whirlpool Bathtub

Rating:
Rated 5.00 out of 5
This extra deep, two person tub has a roomy open shape with eight adjustable jets. All of the jets are recessed and a convenient seat compliments this bath. All back and neck jets are recessed in all whirlpool, combination and air baths. A free pulsating jet, interchangeable with any jet in the tub, is provided with each bath and can be changed out in a matter of seconds and delivers a rotating - pulsating massage action usually only found in hot tubs and spas. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$1,698.00

6262 Whirlpool Bathtub

Elegant two person jetted tub design! Three distinct sitting areas provide massages from different directions. Each bather’s sitting area has a raised headrest. The flowing curves of this spacious design will enhance any bathroom. 19 high pressure jets massage the entire body from the neck to the toes. Note: Prices do not include freight.  Please call for pricing. 
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$3,102.00

7236 BW Whirlpool Bathtub

This jetted tub measures 72” x 36”. When space is limited this 36” wide tub is an excellent choice. This jacuzzi style whirlpool has 7 jets: 1 for the back, 4 for the legs, knees, hips, and torso and two for the feet. Two arm rests and top deck soap dish and shampoo areas are molded into the durable, scratch resistant acrylic bathtub. The bathtubs rectangular exterior shape also allows it to be incorporated into a shower design. Note: Prices do not include freight.  Please call for pricing.
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$1,349.00

7242 GW Whirlpool Bathtub

This traditional jetted bathtub design is always popular for those needing to fill a 72”x42” space. The bathtub's top deck is large enough to install the faucet on. This whirlpool bathtub, with its rectangular shape, allows it to be incorporated into a shower design. 9 jets power the jacuzzi-style massage. Note: Prices do not include freight. Please call for pricing
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

bone

Bone

VIEW OPTIONAL COLORS
$1,486.00
Back to top
Follow by Email
Facebook
Facebook
Contact us

We would love to help you answer all your questions. Please fill out the form below and we will get back to you ASAP or call us at: 1 (800) 289-8827.

Questions, issues or concerns? I'd love to help you!

Click ENTER to chat