The C6042 Elite’s rectangular shape allows a shower to be incorporated into the design, if desired. A single person bath providing both a water and air massage. This jacuzzi-style design has two gently curved areas at the foot of the tub allowing for maximum leg room. An abundance of water jets and air injectors provide two separate massage actions. Watertech’s exclusive top overflow design allows all Elite combo baths to be filled within 2 inches of the top of the bathtub insuring the bather gets an extra deep full body massage while a jacuzzi-style bathtub with a standard side overflow has a water bathing level 4” – 6” inches below the top of the bathtub. The water jets are fully directional and the jet’s scalloped face can be rotated allowing the bather to increase or decrease the water flow and pressure from each jet. A three speed control (high-medium-low) is standard on all combo baths giving the bather complete control of the water flow and pressure from all the water jets simultaneously. For your comfort all back and neck jets are recessed in all Watertech whirlpools and combination bathtubs. The water lines on combo baths are rigid PVC, U.L. certified for 100% drainage assuring a clean and sanitary massage experience each and every time the bath is used. A free pulsating jet is provided with each combo bath and can be easily interchanged with any water jet in a matter of seconds. The pulsating jet is a feature usually found only in hot tubs and spas.
The measurements are 60” in length and 42” in width. The C6042 Elite combo bath, a combination air bath and whirlpool bath, has 20 watertight air injectors with 140 air ports and 11 water jets. Each injector has an internal check valve that insures water never enters any part of the air system (blower, air lines, or air manifold etc). We recommend anyone buying an air bath or combination air/whirlpool bath review and understand the differences between Watertech’s injector baths and other air baths that are manufactured by eliminating air injectors and simply drilling holes through the bottom of the tub into an unserviceable air channel under the tub. All combo baths have a blower powered air system and pump powered water system that can be operated independent of each other or used at the same time. The bather gets to select from three massages – air, water or combination of air and water.
Additional information can be found on our website, in our product catalogue, and by viewing our on line video – Air injector vs Air Channel. All Watertech combination baths are equipped with injectors (air jets) in the Additional information can be found on our website or in our product catalogue. All Watertech combination baths are equipped with injectors (air jets) in the floor and hydrotherapy water jets in the walls of the bathtub, two entirely different massages that can be used separately or together.
- Size: 60"x 42"
- FREE! Pulsating Jet - Interchangeable with any jet neck, back, foot, etc. ($55.00 Value)
- Pump: 9 amp Lifetime Warranty
- Blower Size: 8 amp, Variable Speed, 300 Watt Heated Blower
- Purge Cycle: Activates twenty minutes after bath is switched off. Dries lines, manifold and injectors
- Hydrotherapy Spa Jets: 11
- Air Injectors: 126 air ports from 18 injectors
- Injectors have integral watertight check valves
- Min/Max gallons vary, depending on bather size
- Includes on/off switch
- Includes 3 speed pressure controller (A $75 value)
- All water lines are plumbed completely with rigid schedule 40 PVC pipe (no flex hose)
- Shipping Weight: 165 lbs (price does not include shipping)
- An extended spout is needed if spout is wall mounted
- Drain included in tub price - specify finish
- Tub shown with optional polished brass trim
At WaterTech Whirlpools we ship our quality tubs across the United States using only the top freight lines to ensure your whirlpool tub gets to you on time and in the same condition as when it left our factory floor.
The following are normal shipping times; please call for current shipping rates (subject to change). Please note that shipping is NOT included in the price of each tub. Regular delivery time is 3 weeks from the date we receive your order.
Our Quick Ship option allows your tub to leave our factory floor within 5 business days from the date we receive your order. Please call 1-800-289-8827 for our Quick Ship service.
Precautions & Installation Tips
- Do not lift or carry the whirlpool tub by the supply or return pipes - they could break or spring leaks.
- You must install a mortar bed beneath your tub to meet code and warranty requirements.
- An access opening large enough to service your pump must be installed to meet code requirements.
- Do not frame your whirlpool tub enclosure until you have your tub on the job site.
- Carpenters, plumbers, and tile installers should verify all dimensions to ensure that the tub enclosure is properly sized for your whirlpool tub.
- Detailed installation instructions are available on the installation page of this site.
- Re-test your whirlpool tub for leaks or construction damage before you enclose your tub.
Reliable trucking (freight) companies have been selected by WaterTech Whirlpools to deliver each new Whirlpool Bath. WaterTech Whirlpools packages each bath individually to ensure safe delivery to each customer. The freight carrier will notify customer and schedule a delivery time after the bath leaves our manufacturing facility. Call WaterTech Whirlpools if you have any questions (i.e. price, product, technical, shipping etc.) Phone 1-800-289-8827, Fax: 423-926-6438 email at firstname.lastname@example.org.
INSPECTION AND CLAIMS PROCEDURE: Follow the steps below to eliminate any questions about who is responsible for visible or concealed damage that may have occurred in shipping. Examine the shipping box for signs of damage or mishandling, i.e. staples pulled loose, flaps unglued, punches to the box, severe indentations, or crushed corners. If the box is damaged, the delivery person and receiving person / Consignee must note the damage to the box on delivery paperwork before opening the box. Open the box and inspect the tub for damage. If damage is found, call WaterTech Whirlpools at 1-800-289-8827 before accepting tub. Minor defects such as scuffs, scratches, etc… can be easily taken care of by one of our service people. All issues need to be resolved before signing delivery paperwork.
CONCEALED DAMAGE: WaterTech Whirlpools allows the consignee / owner no more than 48 hours from time of receipt to inspect and report any concealed damage (i.e. leaks, broken pipes, etc…) or shortages of merchandise ordered (i.e. heater, drain, jet trim, etc…). Report concealed damage and shortage to Americas Best Whirlpools 1-800-289-8827.
FAILURE OF THE CONSIGNEE TO INSPECT AND REPORT ANY CONCEALED DAMAGE WITHIN THE 48 HOUR PERIOD PLACES FULL RESPONSIBILITY FOR ANY CONCEALED DAMAGE ON THE CONSIGNEE.
PRE-TEST YOUR TUB: You must pretest your tub for leaks within 48 hours of receipt. WaterTech Whirlpools tubs go through rigorous testing for plumbing leaks and proper operation prior to shipping, but as a secondary precaution, the tub must be re-tested for leaks and proper operation within the allotted 48 hours and before installation. Test your tub in a location that will not be damaged by spilled water such as a basement, driveway, or a garage. Pre-testing your tub allows you to find any plumbing connections that might have worked loose during shipping.
HOW TO PRE-TEST YOUR TUB: Place your tub on a firm flat surface, make sure top of tub is level in all directions. Tape over the drain. Fill with water to 1 or 2 inches above the highest jet. Plug the motor into a GFCI protected outlet, and with the pump running, check all pipes and fittings for moisture. If no leaks are found, remove tape over drain and check for proper drainage. If all is correct, you may continue the Installation process.
IF ANY PROBLEMS ARE DISCOVERED DO NOT INSTALL THE TUB UNTIL YOU HAVE SPOKEN WITH A WATERTECH WHIRLPOOLS REPRESENTATIVE AT 1-800-289-8827