When remodeling, the E6032BW acrylic whirlpool bathtub fits or replaces the standard fiberglass one piece unit found in most homes that occupy a 60 X 32 space. This tub has two arm rests and a soap dish designed into the acrylic. Its 5 foot length and 32 inch width make it a perfect replacement for any standard size tub.
The E6032 BW bathtub has 13 European massage jets. Each jet has 17 water and air ports; 9 center ports for water and 8 outer ports for air. These jets deliver 3 entirely different massage experiences from the same jet – water only, air only or a turbo-charged effervescent mixture of water and air. Three massages that can be used simultaneously or independent of each other for the bather’s full body massage experience. All neck and back jets are recessed in all whirlpool, combination and air baths.
WaterTech bathtubs are constructed with a galvanized steel base (no wood – no plastic) to insure the floor of the bath will never flex or warp. Rigid PVC waterlines are U.L. certified for 100% drainage, insuring a clean and sanitary massage experience with every bath. There is a Lifetime warranty on the pump and the acrylic bathtub shell. For those wanting even a deeper water depth, the bathtub is included with the press-flow drain/overflow.
Watertech introduced its first whirlpool baths over two decades ago with the mission of providing the ultimate hydrotherapy experience through innovation and ingenuity. WaterTech Whirlpool is proud to offer the finest of Watertech’s product line of soaking baths, whirlpool baths and combination baths.
WaterTech is dedicated to serving you with reliability and integrity. If you are remodeling a bathroom, adding a bath to your existing home, or building a new residence, a Watertech bath will add a touch of luxury and elegance to your home.
Only logged in customers who have purchased this product may leave a review.
- Size: 60"x32"
- Pump Size: 7 amp lifetime warranty 7.5A
- Blower Size: 8 amp, 300 watt air heater, variable speed, lifetime warranty, 8A
- European Jets 13, three different massages from each jet, 17 water and air ports per injector
- Drain/Overflow provided with all European massage baths, other optional finishes available
- All water lines are rigid code compliant PVC which insures 100% drainage of all jets, pumps, and lines
- On/Off switch for pump
- Electronic control for blower
- Min/Max gallons very, depending on bather size
- Shipping Weight: 134 lbs; please call for shipping rates to your location
- Bath shown with optional brass jets to highlight jet locations
- Acrylic bath vessel has a lifetime warranty
At WaterTech Whirlpools we ship our quality tubs across the United States using only the top freight lines to ensure your whirlpool tub gets to you on time and in the same condition as when it left our factory floor.
The following are normal shipping times; please call for current shipping rates (subject to change). Please note that shipping is NOT included in the price of each tub. Regular delivery time is 3 weeks from the date we receive your order.
Our Quick Ship option allows your tub to leave our factory floor within 5 business days from the date we receive your order. Please call 1-800-289-8827 for our Quick Ship service.
Precautions & Installation Tips
- Do not lift or carry the whirlpool tub by the supply or return pipes - they could break or spring leaks.
- You must install a mortar bed beneath your tub to meet code and warranty requirements.
- An access opening large enough to service your pump must be installed to meet code requirements.
- Do not frame your whirlpool tub enclosure until you have your tub on the job site.
- Carpenters, plumbers, and tile installers should verify all dimensions to ensure that the tub enclosure is properly sized for your whirlpool tub.
- Detailed installation instructions are available on the installation page of this site.
- Re-test your whirlpool tub for leaks or construction damage before you enclose your tub.
Reliable trucking (freight) companies have been selected by WaterTech Whirlpools to deliver each new Whirlpool Bath. WaterTech Whirlpools packages each bath individually to ensure safe delivery to each customer. The freight carrier will notify customer and schedule a delivery time after the bath leaves our manufacturing facility. Call WaterTech Whirlpools if you have any questions (i.e. price, product, technical, shipping etc.) Phone 1-800-289-8827, Fax: 423-926-6438 email at email@example.com.
INSPECTION AND CLAIMS PROCEDURE: Follow the steps below to eliminate any questions about who is responsible for visible or concealed damage that may have occurred in shipping. Examine the shipping box for signs of damage or mishandling, i.e. staples pulled loose, flaps unglued, punches to the box, severe indentations, or crushed corners. If the box is damaged, the delivery person and receiving person / Consignee must note the damage to the box on delivery paperwork before opening the box. Open the box and inspect the tub for damage. If damage is found, call WaterTech Whirlpools at 1-800-289-8827 before accepting tub. Minor defects such as scuffs, scratches, etc… can be easily taken care of by one of our service people. All issues need to be resolved before signing delivery paperwork.
CONCEALED DAMAGE: WaterTech Whirlpools allows the consignee / owner no more than 48 hours from time of receipt to inspect and report any concealed damage (i.e. leaks, broken pipes, etc…) or shortages of merchandise ordered (i.e. heater, drain, jet trim, etc…). Report concealed damage and shortage to Americas Best Whirlpools 1-800-289-8827.
FAILURE OF THE CONSIGNEE TO INSPECT AND REPORT ANY CONCEALED DAMAGE WITHIN THE 48 HOUR PERIOD PLACES FULL RESPONSIBILITY FOR ANY CONCEALED DAMAGE ON THE CONSIGNEE.
PRE-TEST YOUR TUB: You must pretest your tub for leaks within 48 hours of receipt. WaterTech Whirlpools tubs go through rigorous testing for plumbing leaks and proper operation prior to shipping, but as a secondary precaution, the tub must be re-tested for leaks and proper operation within the allotted 48 hours and before installation. Test your tub in a location that will not be damaged by spilled water such as a basement, driveway, or a garage. Pre-testing your tub allows you to find any plumbing connections that might have worked loose during shipping.
HOW TO PRE-TEST YOUR TUB: Place your tub on a firm flat surface, make sure top of tub is level in all directions. Tape over the drain. Fill with water to 1 or 2 inches above the highest jet. Plug the motor into a GFCI protected outlet, and with the pump running, check all pipes and fittings for moisture. If no leaks are found, remove tape over drain and check for proper drainage. If all is correct, you may continue the Installation process.
IF ANY PROBLEMS ARE DISCOVERED DO NOT INSTALL THE TUB UNTIL YOU HAVE SPOKEN WITH A WATERTECH WHIRLPOOLS REPRESENTATIVE AT 1-800-289-8827