<
Navigation
Description

Description

Watertechs pipeless acrylic Foot Spa allows homeowners to install the same high pressure foot massage spa used in professional nail salons. In less than minute you can fill the spa and it is ready for use. Watertechs pipeless jet technology provides you with the same institutional quality sanitation that is essential in a busy nail salon that gives multiple pedicures in a day. Two arched foot rests allow your feet to fully relax while two high pressure jets provide pain relief and improve circulation and flexibility.

The jets’ patented magnetic design allows the jet face to be removed from the motor by gently pulling on it. The jet can then be sanitized by putting it into a sterilizing solution, then rinse, and reinstall in a matter of seconds. If the foot spa is being used in the home, normal cleaning is all that is required because the jets drain 100% and the foot spa is not being used by the general public.

Standard jet finishes are White and Chrome. Custom finishes are available, call Watertech for the details. Watertech also offers a furniture grade hardwood cabinet for the foot spa.

Price: $685

Specifications Sheet

Foot Spa Cabinet
The cabinet is constructed of solid cherry hardwood with a furniture grade finish. Available in 10 stain colors and a clear water resistant urethane finish protects the hardwood from water damage. The cabinet’s top deck provides ample space to hold faucets and the on/off controls. 4 removable panels allow easy servicing, electrical and plumbing installation. 4 concealed mounting screws attach the acrylic spa to the cabinet and can be removed and reinstalled during installation if necessary.

Foot spa cabinet (not included): $479

Reviews (1)

1 review for Foot Spa

  1. Rated 4 out of 5

    Terry

    I saw your newest model online and plan on incorporating it into our renovation project. I love going to the salon for pedicure because of the water massage I receive before getting my nails done. I am on my feet a lot and getting a foot message at home every night is going to be great.

Only logged in customers who have purchased this product may leave a review.

Shipping & Receiving

Shipping

At WaterTech Whirlpools we ship our quality tubs across the United States using only the top freight lines to ensure your whirlpool tub gets to you on time and in the same condition as when it left our factory floor. 

The following are normal shipping times; please call for current shipping rates (subject to change).  Please note that shipping is NOT included in the price of each tub.  Regular delivery time is 3 weeks from the date we receive your order.

Our Quick Ship option allows your tub to leave our factory floor within 5 business days from the date we receive your order.   Please call 1-800-289-8827 for our Quick Ship service.

 

 

Precautions & Installation Tips

  • Do not lift or carry the whirlpool tub by the supply or return pipes - they could break or spring leaks.
  • You must install a mortar bed beneath your tub to meet code and warranty requirements.
  • An access opening large enough to service your pump must be installed to meet code requirements.
  • Do not frame your whirlpool tub enclosure until you have your tub on the job site.
  • Carpenters, plumbers, and tile installers should verify all dimensions to ensure that the tub enclosure is properly sized for your whirlpool tub.
  • Detailed installation instructions are available on the installation page of this site.
  • Re-test your whirlpool tub for leaks or construction damage before you enclose your tub.

 

Receiving

Reliable trucking (freight) companies have been selected by WaterTech Whirlpools to deliver each new Whirlpool Bath. WaterTech Whirlpools packages each bath individually to ensure safe delivery to each customer. The freight carrier will notify customer and schedule a delivery time after the bath leaves our manufacturing facility. Call WaterTech Whirlpools if you have any questions (i.e. price, product, technical, shipping etc.) Phone 1-800-289-8827, Fax: 423-926-6438 email at info@watertechtn.com.

INSPECTION AND CLAIMS PROCEDURE: Follow the steps below to eliminate any questions about who is responsible for visible or concealed damage that may have occurred in shipping. Examine the shipping box for signs of damage or mishandling, i.e. staples pulled loose, flaps unglued, punches to the box, severe indentations, or crushed corners. If the box is damaged, the delivery person and receiving person / Consignee must note the damage to the box on delivery paperwork before opening the box. Open the box and inspect the tub for damage. If damage is found, call WaterTech Whirlpools at 1-800-289-8827 before accepting tub. Minor defects such as scuffs, scratches, etc… can be easily taken care of by one of our service people. All issues need to be resolved before signing delivery paperwork.

CONCEALED DAMAGE: WaterTech Whirlpools allows the consignee / owner no more than 48 hours from time of receipt to inspect and report any concealed damage (i.e. leaks, broken pipes, etc…) or shortages of merchandise ordered (i.e. heater, drain, jet trim, etc…). Report concealed damage and shortage to Americas Best Whirlpools 1-800-289-8827.

FAILURE OF THE CONSIGNEE TO INSPECT AND REPORT ANY CONCEALED DAMAGE WITHIN THE 48 HOUR PERIOD PLACES FULL RESPONSIBILITY FOR ANY CONCEALED DAMAGE ON THE CONSIGNEE.

PRE-TEST YOUR TUB: You must pretest your tub for leaks within 48 hours of receipt. WaterTech Whirlpools tubs go through rigorous testing for plumbing leaks and proper operation prior to shipping, but as a secondary precaution, the tub must be re-tested for leaks and proper operation within the allotted 48 hours and before installation. Test your tub in a location that will not be damaged by spilled water such as a basement, driveway, or a garage. Pre-testing your tub allows you to find any plumbing connections that might have worked loose during shipping.

HOW TO PRE-TEST YOUR TUB: Place your tub on a firm flat surface, make sure top of tub is level in all directions. Tape over the drain. Fill with water to 1 or 2 inches above the highest jet. Plug the motor into a GFCI protected outlet, and with the pump running, check all pipes and fittings for moisture. If no leaks are found, remove tape over drain and check for proper drainage. If all is correct, you may continue the Installation process.

IF ANY PROBLEMS ARE DISCOVERED DO NOT INSTALL THE TUB UNTIL YOU HAVE SPOKEN WITH A WATERTECH WHIRLPOOLS REPRESENTATIVE AT 1-800-289-8827

Related Products

Variable Speed Pump Control

The Variable Speed Control is designed to give you, the bather, ability to pinpoint the pressure that is right for you. The VSC system can be used on existing whirlpool baths by pluging in the...
$274.00

Turbo Charging System

The turbo charging system is composed of a single speed, 1 h.p., 675 watt heated airblower, hoses, controls, 8 port manifold and is factory installed. Turbo charging a whirlpool bath system allows jets to provide...
$325.00

Additional/Custom Jet Locations

While all of our tubs are engineered to provide maximum hydrotherapy, we realize certain individuals may want or need special jet locations to provide them with hydrotherapy to particular body areas such as knees, feet,...
$51.00

Pulsating Jet

Jet nozzle spins and produces a pulsing action. This type of jet is often requested in the foot and back areas. Jet pulsation is adjustable. was last modified: December 13th, 2017
$55.00

Underwater Mood Light

A clear light with interchangeable blue, red and clear lenses. was last modified: December 13th, 2017
$123.00

LED Underwater Mood Light

By simply pressing a button the bather may transition through 8 colors while the last selection will automatically transition through all 8 colors. was last modified: December 13th, 2017
$219.00

Pillows/ Headrests

Come standard on several models, but are available for all models. Easily removed for cleaning and are available in black & white. was last modified: December 13th, 2017
$27.00

Roman 4-Piece Faucet Set

Chrome: $530
Nickel: $605
Bronze: $665
All our designer faucetry come from the American Faucet and Coatings Corporation, which specialize in high end manufacturing for the bath and kitchen industry. This family owned business is located in Vista, CA and employs over 100 skilled workers that operate out of a 100,000 sq ft factory. All our faucets use German made ¼ turn ceramic disc cartridges with a lifetime warranty. Spouts, handles, escutcheons and valves are solid brass! Not plastic or stamped metal.
$530.00

Injector Finishes

Chrome: $274
Nickel: $343
Polished Brass: $321
Oil-Rubbed Bronze: $370
Watertech offers a beautiful variety of injector finishes for your tub, available in chrome, nickel, polished brass and oil-rubbed bronze. Note: White and bone jets are standard in all tubs with some other colors available. For Walk-in bath tubs the standard finish is chrome.
$274.00

Micro Lip

The micro mount feature not only gives your bathtub a whole new look, but it also provides you easier access upon existing your tub as the deck sits more flush with your surroundings.  The Micro Lip option will reduce the height of the tub lip to roughly 3/4" tall.  (Please call for details as this accessory may not be available on all models.)
$137.00
Back to top
Follow by Email
Facebook
Facebook
Contact us

We would love to help you answer all your questions. Please fill out the form below and we will get back to you ASAP or call us at: 1 (800) 289-8827.

Questions, issues or concerns? I'd love to help you!

Click ENTER to chat