<
Navigation
Description

Description

Watertech’s new medical device the Pedisonic is ideal for individuals needing to stimulate and massage the bottom of their feet.  Two black firm yet flexible Vibrosonic® “thumbs” protrude from the surface of the acrylic cabinet and compress against the bottom of the feet delivering a multifaceted foot massage.  The two thumbs are powered by two (2) electro-magnetic motors controlled by a hand held remote.

Each thumb has five (5) vibration speeds, pressure settings and 3 modes of sequencing.  Simply place your feet on the thumbs, select the desired settings and then move your feet where you want them massaged.

Its compact size and weight make it easy to store and use every day.  The sloping acrylic cabinet was designed so you will be comfortable when using the Pedisonic while sitting on a chair or couch.

Physicians and health care providers are increasingly recommending foot massages to individuals with diabetes, arthritis, plantar fasciitis, metatarsalgia foot pain, poor circulation, and all ailments of the foot and upper foot areas.  Using the Watertech Pedisonic for an extended length of time on the high setting will actually provide a soothing pulsating sensation in the muscles from the ankles to the knees.

There are numerous “inexpensive” small appliances advertised that people purchase, use once and then dispose of because they are not well advertised and have limited benefits with poor results.  The Watertech Pedisonic is a medical device of the highest quality providing an extremely effective shiatsu-style mult-faceted soothing foot massage!

Price: $399

Specification Sheet for Pedisonic

  • White high gloss nonporous acrylic cabinet with sloping foot support.
  • Hand held remote
  • 5 speeds
  • 3 sequence modes
  • 2 chrome electro magnetic motor/thumbs to massage the feet
  • Weight: 9 lbs (note: please contact Watertech for shipping details to your location)
  • Electrical requirements: plugs into a standard home receptacle
  • UPS shippable
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Receiving

Shipping

At WaterTech Whirlpools we ship our quality tubs across the United States using only the top freight lines to ensure your whirlpool tub gets to you on time and in the same condition as when it left our factory floor. 

The following are normal shipping times; please call for current shipping rates (subject to change).  Please note that shipping is NOT included in the price of each tub.  Regular delivery time is 3 weeks from the date we receive your order.

Our Quick Ship option allows your tub to leave our factory floor within 5 business days from the date we receive your order.   Please call 1-800-289-8827 for our Quick Ship service.

 

 

Precautions & Installation Tips

  • Do not lift or carry the whirlpool tub by the supply or return pipes - they could break or spring leaks.
  • You must install a mortar bed beneath your tub to meet code and warranty requirements.
  • An access opening large enough to service your pump must be installed to meet code requirements.
  • Do not frame your whirlpool tub enclosure until you have your tub on the job site.
  • Carpenters, plumbers, and tile installers should verify all dimensions to ensure that the tub enclosure is properly sized for your whirlpool tub.
  • Detailed installation instructions are available on the installation page of this site.
  • Re-test your whirlpool tub for leaks or construction damage before you enclose your tub.

 

Receiving

Reliable trucking (freight) companies have been selected by WaterTech Whirlpools to deliver each new Whirlpool Bath. WaterTech Whirlpools packages each bath individually to ensure safe delivery to each customer. The freight carrier will notify customer and schedule a delivery time after the bath leaves our manufacturing facility. Call WaterTech Whirlpools if you have any questions (i.e. price, product, technical, shipping etc.) Phone 1-800-289-8827, Fax: 423-926-6438 email at info@watertechtn.com.

INSPECTION AND CLAIMS PROCEDURE: Follow the steps below to eliminate any questions about who is responsible for visible or concealed damage that may have occurred in shipping. Examine the shipping box for signs of damage or mishandling, i.e. staples pulled loose, flaps unglued, punches to the box, severe indentations, or crushed corners. If the box is damaged, the delivery person and receiving person / Consignee must note the damage to the box on delivery paperwork before opening the box. Open the box and inspect the tub for damage. If damage is found, call WaterTech Whirlpools at 1-800-289-8827 before accepting tub. Minor defects such as scuffs, scratches, etc… can be easily taken care of by one of our service people. All issues need to be resolved before signing delivery paperwork.

CONCEALED DAMAGE: WaterTech Whirlpools allows the consignee / owner no more than 48 hours from time of receipt to inspect and report any concealed damage (i.e. leaks, broken pipes, etc…) or shortages of merchandise ordered (i.e. heater, drain, jet trim, etc…). Report concealed damage and shortage to Americas Best Whirlpools 1-800-289-8827.

FAILURE OF THE CONSIGNEE TO INSPECT AND REPORT ANY CONCEALED DAMAGE WITHIN THE 48 HOUR PERIOD PLACES FULL RESPONSIBILITY FOR ANY CONCEALED DAMAGE ON THE CONSIGNEE.

PRE-TEST YOUR TUB: You must pretest your tub for leaks within 48 hours of receipt. WaterTech Whirlpools tubs go through rigorous testing for plumbing leaks and proper operation prior to shipping, but as a secondary precaution, the tub must be re-tested for leaks and proper operation within the allotted 48 hours and before installation. Test your tub in a location that will not be damaged by spilled water such as a basement, driveway, or a garage. Pre-testing your tub allows you to find any plumbing connections that might have worked loose during shipping.

HOW TO PRE-TEST YOUR TUB: Place your tub on a firm flat surface, make sure top of tub is level in all directions. Tape over the drain. Fill with water to 1 or 2 inches above the highest jet. Plug the motor into a GFCI protected outlet, and with the pump running, check all pipes and fittings for moisture. If no leaks are found, remove tape over drain and check for proper drainage. If all is correct, you may continue the Installation process.

IF ANY PROBLEMS ARE DISCOVERED DO NOT INSTALL THE TUB UNTIL YOU HAVE SPOKEN WITH A WATERTECH WHIRLPOOLS REPRESENTATIVE AT 1-800-289-8827

Related Products

9 Amp or 13 Amp Pump Upgrade

Watertech whirlpool baths come equipped with 7 Amp or 9 Amp pumps. If the model you choose comes standard with a 7 Amp pump you can upgrade to a 9 Amp Pump. If the model you choose comes standard with a 9 Amp pump...
$102.00

Low Water Sensor

Great for those families with young ones running around! The low water sensor is a factory installed device that will not let the tub operate unless the water level is at the appropriate level. This...
$156.00

Underwater Mood Light

A clear light with interchangeable blue, red and clear lenses. was last modified: December 13th, 2017
$123.00

LED Underwater Mood Light

By simply pressing a button the bather may transition through 8 colors while the last selection will automatically transition through all 8 colors. was last modified: December 13th, 2017
$219.00

Grab Handles

Pricing is per pair

White, biscuit, or bone. Grab handles are not factory installed but are easily installed on the jobsite by contractor or plumber. Length 9 inches
$98.00

Ozonator

Ozone is one of nature’s most powerful oxidizers and can safely provide an additional level of sanitation to your bathing environment. was last modified: February 5th, 2018
$159.00

Soaking Bathtub Heater

Watertech’s new soaking bathtub heater is designed to maintain the bathtubs water temperature between 102 F and 104 F and eliminates the bather having to constantly add hot water. The heat system is comprised of...
$423.00

Roman 4-Piece Faucet Set

Chrome: $530
Nickel: $605
Bronze: $665
All our designer faucetry come from the American Faucet and Coatings Corporation, which specialize in high end manufacturing for the bath and kitchen industry. This family owned business is located in Vista, CA and employs over 100 skilled workers that operate out of a 100,000 sq ft factory. All our faucets use German made ¼ turn ceramic disc cartridges with a lifetime warranty. Spouts, handles, escutcheons and valves are solid brass! Not plastic or stamped metal.
$530.00

Roman 3-Piece Faucet Set

Chrome: $411
Nickel: $534
Bronze: $548
All our designer faucetry come from the American Faucet and Coatings Corporation, which specialize in high end manufacturing for the bath and kitchen industry. This family owned business is located in Vista, CA and employs over 100 skilled workers that operate out of a 100,000 sq ft factory. All our faucets use German made ¼ turn ceramic disc cartridges with a lifetime warranty. Spouts, handles, escutcheons and valves are solid brass! Not plastic or stamped metal.
$411.00

Surface Heating System

Watertech's new surface heating system heats the tub's acrylic surface where the radiant heater pad is installed on the back of the tub.  The surface heating system is available for soaking, whirlpool, air bath, walk-in tub, and our acrylic shower base.
$433.00
Back to top
Follow by Email
Facebook
Facebook
Contact us

We would love to help you answer all your questions. Please fill out the form below and we will get back to you ASAP or call us at: 1 (800) 289-8827.

Questions, issues or concerns? I'd love to help you!

Click ENTER to chat