Navigation

Roman 3-Piece Faucet Set

‹Return to Previous Page
Description

Description

Roman 3-Piece Faucet Set (With Lifetime Warranty)

All our designer faucetry come from the American Faucet and Coatings Corporation, which specialize in high end manufacturing for the bath and kitchen industry. This family owned business is located in Vista, CA and employs over 100 skilled workers that operate out of a 100,000 sq ft factory. All our faucets use German made ¼ turn ceramic disc cartridges with a lifetime warranty. Spouts, handles, escutcheons and valves are solid brass! Not plastic or stamped metal.

Lesser quality faucets use spring loaded balls and rubber seals, nylon cartridges, washers and seats, that wear out quickly leading to drips, costly frequent service and part replacement. All faucet valves are machined with standard fitting sizes and threads which allows for more flexibility and creativity during installation. Faucets should be installed using ½” or larger diameter pipe to insure adequate flow.

Many imported faucets are equipped with small diameter hoses (⅛”, ¼” and ⅜”) which greatly restrict flow rates. Finding parts for imported faucets with non standard fittings can be troublesome. The faucet finishes carry a lifetime warranty so should a problem occur with the faucet, simply call us at 800-289-8827. Warranty excludes shipping and labor costs. Call Watertech at 1- 800-289-8827 if you have installation questions or need warranty service. All products are I.A.P.M.O. and CSA BIZS listed in the USA and Canada.

Faucets – Watertech offers a wide array of deck mounted faucets, available in chrome, nickel and oil-rubbed bronze.
NEW! Cascading whirlpool faucet, overflow and drain combination. The sleek, thin design of the new faucet combines the functionality and convenience of filling and draining the bathtub through one integral unit with its patented backflow prevention technology. The filler and overflow are located inside the bathtub and eliminates the need for a spout. The all brass Cascading Whirlpool Faucet eliminates the chance of bumping your head or hitting your legs as you enter or exit the bathtub. The Cascade Whirlpool Faucet also eliminates the cost of purchasing a separate drain and overflow. Available in chrome, nickel and oil rubbed bronze finishes.
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Receiving

Shipping

At WaterTech Whirlpools we ship our quality tubs across the United States using only the top freight lines to ensure your whirlpool tub gets to you on time and in the same condition as when it left our factory floor. 

The following are normal shipping times; please call for current shipping rates (subject to change).  Please note that shipping is NOT included in the price of each tub.  Regular delivery time is 3 weeks from the date we receive your order.

Our Quick Ship option allows your tub to leave our factory floor within 5 business days from the date we receive your order.   Please call 1-800-289-8827 for our Quick Ship service.

 

 

Precautions & Installation Tips

  • Do not lift or carry the whirlpool tub by the supply or return pipes - they could break or spring leaks.
  • You must install a mortar bed beneath your tub to meet code and warranty requirements.
  • An access opening large enough to service your pump must be installed to meet code requirements.
  • Do not frame your whirlpool tub enclosure until you have your tub on the job site.
  • Carpenters, plumbers, and tile installers should verify all dimensions to ensure that the tub enclosure is properly sized for your whirlpool tub.
  • Detailed installation instructions are available on the installation page of this site.
  • Re-test your whirlpool tub for leaks or construction damage before you enclose your tub.

 

Receiving

Reliable trucking (freight) companies have been selected by WaterTech Whirlpools to deliver each new Whirlpool Bath. WaterTech Whirlpools packages each bath individually to ensure safe delivery to each customer. The freight carrier will notify customer and schedule a delivery time after the bath leaves our manufacturing facility. Call WaterTech Whirlpools if you have any questions (i.e. price, product, technical, shipping etc.) Phone 1-800-289-8827, Fax: 423-926-6438 email at info@watertechtn.com.

INSPECTION AND CLAIMS PROCEDURE: Follow the steps below to eliminate any questions about who is responsible for visible or concealed damage that may have occurred in shipping. Examine the shipping box for signs of damage or mishandling, i.e. staples pulled loose, flaps unglued, punches to the box, severe indentations, or crushed corners. If the box is damaged, the delivery person and receiving person / Consignee must note the damage to the box on delivery paperwork before opening the box. Open the box and inspect the tub for damage. If damage is found, call WaterTech Whirlpools at 1-800-289-8827 before accepting tub. Minor defects such as scuffs, scratches, etc… can be easily taken care of by one of our service people. All issues need to be resolved before signing delivery paperwork.

CONCEALED DAMAGE: WaterTech Whirlpools allows the consignee / owner no more than 48 hours from time of receipt to inspect and report any concealed damage (i.e. leaks, broken pipes, etc…) or shortages of merchandise ordered (i.e. heater, drain, jet trim, etc…). Report concealed damage and shortage to Americas Best Whirlpools 1-800-289-8827.

FAILURE OF THE CONSIGNEE TO INSPECT AND REPORT ANY CONCEALED DAMAGE WITHIN THE 48 HOUR PERIOD PLACES FULL RESPONSIBILITY FOR ANY CONCEALED DAMAGE ON THE CONSIGNEE.

PRE-TEST YOUR TUB: You must pretest your tub for leaks within 48 hours of receipt. WaterTech Whirlpools tubs go through rigorous testing for plumbing leaks and proper operation prior to shipping, but as a secondary precaution, the tub must be re-tested for leaks and proper operation within the allotted 48 hours and before installation. Test your tub in a location that will not be damaged by spilled water such as a basement, driveway, or a garage. Pre-testing your tub allows you to find any plumbing connections that might have worked loose during shipping.

HOW TO PRE-TEST YOUR TUB: Place your tub on a firm flat surface, make sure top of tub is level in all directions. Tape over the drain. Fill with water to 1 or 2 inches above the highest jet. Plug the motor into a GFCI protected outlet, and with the pump running, check all pipes and fittings for moisture. If no leaks are found, remove tape over drain and check for proper drainage. If all is correct, you may continue the Installation process.

IF ANY PROBLEMS ARE DISCOVERED DO NOT INSTALL THE TUB UNTIL YOU HAVE SPOKEN WITH A WATERTECH WHIRLPOOLS REPRESENTATIVE AT 1-800-289-8827

Related Products

9 Amp or 13 Amp Pump Upgrade

Watertech whirlpool baths come equipped with 7 Amp or 9 Amp pumps. If the model you choose comes standard with a 7 Amp pump you can upgrade to a 9 Amp Pump. If the model you choose comes standard with a 9 Amp pump...
$90.00

Electric Heater

Available for all models. Heater specifications: 1.5KW, 120V, 12.5 A. Requires dedicated GFCI circuit. Heater maintains bath water temperature during use and prevents the water temperature from decreasing. Our heater is equipped with automatic reset...
$247.00

Variable Speed Pump Control

The Variable Speed Control is designed to give you, the bather, ability to pinpoint the pressure that is right for you. The VSC system can be used on existing whirlpool baths by pluging in the...
$274.00

Turbo Charging System

The turbo charging system is composed of a single speed, 1 h.p., 675 watt heated airblower, hoses, controls, 8 port manifold and is factory installed. Turbo charging a whirlpool bath system allows jets to provide...
$325.00

Additional/Custom Jet Locations

While all of our tubs are engineered to provide maximum hydrotherapy, we realize certain individuals may want or need special jet locations to provide them with hydrotherapy to particular body areas such as knees, feet,...
$51.00

Custom Pump Location

Customers needing to change a standard pump location to meet their particular building project need only to call Watertech. We can place the pump where you want it. All building codes require access to the...
$103.00

Jet Finishes

Chrome: $274
Nickel: $343
Polished Brass: $321
Oil-Rubbed Bronze: $370
Watertech offers a beautiful variety of jet finishes for your tub, available in chrome, nickel, polished brass and oil-rubbed bronze. Note: White and bone jets are standard in all tubs with some other colors available. For Walk-in bath tubs the standard finish is chrome.
$274.00

Grab Handles

Clear acrylic with nickel, chrome, or brass inserts or white, biscuit, or bone. Grab handles are not factory installed but are easily installed on the jobsite by contractor or plumber.
$98.00

Ozonator

Ozone is one of nature’s most powerful oxidizers and can safely provide an additional level of sanitation to your bathing environment.
$160.00

Soaking Bathtub Heater

Watertech’s new soaking bathtub heater is designed to maintain the bathtubs water temperature between 102 F and 104 F and eliminates the bather having to constantly add hot water. The heat system is comprised of...
$424.00
Back to top
Follow by Email
Facebook
Facebook
Contact us

We would love to help you answer all your questions. Please fill out the form below and we will get back to you ASAP or call us at: 1 (800) 289-8827.

Questions, issues or concerns? I'd love to help you!

Click ENTER to chat