<
Navigation

C6262 Combination Bathtub

‹Return to Previous Page
Description

Description

Elegant two person combination whirlpool bath and air bath. The C6262 combination bathtub has three distinct sitting areas and each sitting area has a raised headrest. The flowing curves of this spacious design will enhance any bathroom. 2 – 2HP pumps power the water jets and provide a deep tissue massage. The 1HP heated air blower, with variable speed control, powers the air massage system. We have two other corner whirlpool/air combinations available, the C6060 and the C6464 Elite.

On combination baths all the water jets are fully directional and the jet’s scalloped face can be rotated allowing the bather to increase or decrease the water flow and pressure from each jet. A three speed control (high-medium-low) is standard on all combo baths giving the bather complete control of the water flow and pressure from all the water jets simultaneously. For your comfort all back and neck jets are recessed in all Watertech whirlpools and combination bathtubs. The water lines on combo baths are rigid PVC, U.L. certified for 100% drainage assuring a clean and sanitary massage experience each and every time the bath is used. A free pulsating jet is provided with each combo bath and can be easily interchanged with any water jet in a matter of seconds. The pulsating jet is a feature usually found only in hot tubs and spas.

The measurements are 62” in length and 62 ” in width. The C6262 combo bath, a combination air bath and whirlpool bath, has 31 watertight air injectors with 217 air ports and 19 water jets. Each injector has an internal check valve that insures water never enters any part of the air system (blower, air lines, or air manifold etc). We recommend anyone buying an air bath or combination air/whirlpool bath review and understand the differences between Watertech’s injector baths and other air baths that are manufactured by eliminating air injectors and simply drilling holes through the bottom of the tub into an unserviceable air channel under the tub. All combo baths have a blower powered air system and pump powered water system that can be operated independent of each other or used at the same time. The bather gets to select from three massages – air, water or combination of air and water.

Additional information can be found on our website or in our product catalogue. All Watertech combination baths are equipped with injectors (air jets) in the floor and hydrotherapy water jets in the walls of the bathtub, two entirely different massages that can be used separately or together.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “C6262 Combination Bathtub”

Specifications
Specification Sheets
Specifications
  • Size: 62" x 62"
  • FREE! Pulsating Jet - Interchangeable with any jet neck, back, foot, etc. ($55.00 Value)
  • Pumps: Two 7 amp Lifetime Warranty
  • Blower Size: 8 Amp, Variable Speed, 300 Watt Heated Blower
  • Purge Cycle: Activates twenty minutes after bath is switched off. Dries lines, manifold and injectors
  • Electronic Controls
  • Hydrotherapy Spa Jets: 19
  • Air Injectors: 217 air ports from 31 injectors
  • Manifold System: Manifold contains check valve protection. Water never enters any part of the air system. Tub shown with optional polished brass injectors.
  • Min/Max gallons vary, depending on bather size
  • Includes on/off air switch
  • Includes 3 speed pressure controller (A $75 value)
  • All water lines are plumbed completely with rigid schedule 40 PVC pipe (no flex hose)
  • Shipping Weight: 244 lbs; please call for shipping rates to your location
  • Installation template (click here for template)
  • Tub shown with optional polished brass trim; additional photos show only whirlpool jets
  • Injectors have integral watertight check valves

Shipping & Receiving

Shipping

At WaterTech Whirlpools we ship our quality tubs across the United States using only the top freight lines to ensure your whirlpool tub gets to you on time and in the same condition as when it left our factory floor. 

The following are normal shipping times; please call for current shipping rates (subject to change).  Please note that shipping is NOT included in the price of each tub.  Regular delivery time is 3 weeks from the date we receive your order.

Our Quick Ship option allows your tub to leave our factory floor within 5 business days from the date we receive your order.   Please call 1-800-289-8827 for our Quick Ship service.

 

 

Precautions & Installation Tips

  • Do not lift or carry the whirlpool tub by the supply or return pipes - they could break or spring leaks.
  • You must install a mortar bed beneath your tub to meet code and warranty requirements.
  • An access opening large enough to service your pump must be installed to meet code requirements.
  • Do not frame your whirlpool tub enclosure until you have your tub on the job site.
  • Carpenters, plumbers, and tile installers should verify all dimensions to ensure that the tub enclosure is properly sized for your whirlpool tub.
  • Detailed installation instructions are available on the installation page of this site.
  • Re-test your whirlpool tub for leaks or construction damage before you enclose your tub.

 

Receiving

Reliable trucking (freight) companies have been selected by WaterTech Whirlpools to deliver each new Whirlpool Bath. WaterTech Whirlpools packages each bath individually to ensure safe delivery to each customer. The freight carrier will notify customer and schedule a delivery time after the bath leaves our manufacturing facility. Call WaterTech Whirlpools if you have any questions (i.e. price, product, technical, shipping etc.) Phone 1-800-289-8827, Fax: 423-926-6438 email at info@watertechtn.com.

INSPECTION AND CLAIMS PROCEDURE: Follow the steps below to eliminate any questions about who is responsible for visible or concealed damage that may have occurred in shipping. Examine the shipping box for signs of damage or mishandling, i.e. staples pulled loose, flaps unglued, punches to the box, severe indentations, or crushed corners. If the box is damaged, the delivery person and receiving person / Consignee must note the damage to the box on delivery paperwork before opening the box. Open the box and inspect the tub for damage. If damage is found, call WaterTech Whirlpools at 1-800-289-8827 before accepting tub. Minor defects such as scuffs, scratches, etc… can be easily taken care of by one of our service people. All issues need to be resolved before signing delivery paperwork.

CONCEALED DAMAGE: WaterTech Whirlpools allows the consignee / owner no more than 48 hours from time of receipt to inspect and report any concealed damage (i.e. leaks, broken pipes, etc…) or shortages of merchandise ordered (i.e. heater, drain, jet trim, etc…). Report concealed damage and shortage to Americas Best Whirlpools 1-800-289-8827.

FAILURE OF THE CONSIGNEE TO INSPECT AND REPORT ANY CONCEALED DAMAGE WITHIN THE 48 HOUR PERIOD PLACES FULL RESPONSIBILITY FOR ANY CONCEALED DAMAGE ON THE CONSIGNEE.

PRE-TEST YOUR TUB: You must pretest your tub for leaks within 48 hours of receipt. WaterTech Whirlpools tubs go through rigorous testing for plumbing leaks and proper operation prior to shipping, but as a secondary precaution, the tub must be re-tested for leaks and proper operation within the allotted 48 hours and before installation. Test your tub in a location that will not be damaged by spilled water such as a basement, driveway, or a garage. Pre-testing your tub allows you to find any plumbing connections that might have worked loose during shipping.

HOW TO PRE-TEST YOUR TUB: Place your tub on a firm flat surface, make sure top of tub is level in all directions. Tape over the drain. Fill with water to 1 or 2 inches above the highest jet. Plug the motor into a GFCI protected outlet, and with the pump running, check all pipes and fittings for moisture. If no leaks are found, remove tape over drain and check for proper drainage. If all is correct, you may continue the Installation process.

IF ANY PROBLEMS ARE DISCOVERED DO NOT INSTALL THE TUB UNTIL YOU HAVE SPOKEN WITH A WATERTECH WHIRLPOOLS REPRESENTATIVE AT 1-800-289-8827

Related Products

C6036 Elite Combination Bathtub

Give yourself a little more elbow room with the 6036 Elite combination tub. When you have a few more inches to fill in your bathroom, this tub will fit it perfectly and give you plenty of luxurious amenities to boot. Five recessed water therapy jets are installed in the sloping backrest, so you get a full-on back massage, while you recline in comfort against the molded armrests. Two curved foot wells allow you to stretch out your legs and get a premium foot rub at the same time. Four more jets on the sides reach your thighs and calves. Our 9-amp whirlpool pump provides all the power you need to get just the right amount of pressure through the adjustable jets, while our 8-amp heated air blower powers 18 air injectors to provide gentle massaging bubbles. You get added water depth too, with our Top Overflow which lets you add up to four more inches of water to our tub. Sink your entire body down into the therapeutic swirling water in the 6036 Elite combination tub. Note: Prices do not include freight.  Please call for pricing.  

Specification Sheets

C6036 Elite Specification Sheet Watertech-Installation-Booklet    
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

OZONATOR

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,877.00

C6042 Elite Combination Bathtub

The generous width of the 6042 Elite combination tub gives you plenty of room to spread out, but the tub will tuck neatly into your bathroom alcove with no problem. Its rectangular shape is perfect for a bath/shower combination, and its slightly angled deck directs water back into the tub. Eleven whirlpool jets massage your cares away with five dedicated to your neck, shoulders, and back; two aimed at your feet, one in each of the curved footwells; and four on the sides of the tub to reach your hips, thighs, and calves. The tub comes standard with a powerful 9-amp pump and rigid hand-formed PVC pipes that drain completely to make sure your water is fresh and clean. Twenty-one air injectors infuse the water with thousands of time massaging bubbles. Our steel-reinforced base and motor mount will stand the test of time, unlike other tubs built on plywood or particle board. Our beautiful tubs are made with a genuine Lucite acrylic shell, the best in the business for its long-lasting shine and durability. You can choose from a variety of colors to custom-fit your tub into your bathroom design. Make the 6042 Elite combination tub the center of your bathroom design.  

Specification Sheets

C6042 Elite Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

OZONATOR

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$4,213.00

C7236 Elite Combination Bathtub

Rating:
Want plenty of room to stretch out and linger in your bathtub? You won’t feel cramped in the six-foot long 7236 Elite combination tub. It has more than enough room for even the tallest bather, plus enough features to make you feel pampered. Eleven spa-grade whirlpool jets deliver hydrotherapy massage in this tub. Five of them are recessed into the reclined seat back; two of them are inset in the footwells, and four side jets massage the upper and lower legs. All the jets are directional and adjustable for pressure. It comes with an interchangeable pulsating jet and three-speed pressure controller. Eighteen air injectors spread throughout the floor create plenty of bubble action. All the injectors are integrated into a system of sealed PVC air lines, instead of an air channel system simply drilled in the tub floor. This means our system delivers consistent air pressure to every jet through clean, dry lines. Molded armrests follow the curves of the tub and provide added comfort. Our exclusive Top Overflow allows you to fill the tub to two inches from the top, adding superior water depth to the tub. Customize the 7236 Elite to fit your design plan by choosing from several Lucite acrylic surface finishes and faucet and drain finishes. The Lucite surface is easy to clean, and the rigid PVC hand-formed pipes drain completely for fresh water every time you bathe. A galvanized steel base and motor mount give a solid footing under the tub. For ease of care, durability, and quality, you can’t beat a Watertech tub. Note: Prices do not include freight.  Please call for pricing.   Specification Sheets C7236 Elite Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

OZONATOR

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$4,350.00

C7248 Elite Combination Bathtub

The C7248 Elite combination bathtub is a two person combination air and water hydrotherapy tub. The bathtub's wide bathing area allows bathers to sit side by side. Extra leg room is provided each bather by gently curving the foot end of the tub. Six recessed water jets massage the bathers back area with six additional water jets, located in the walls of the tub, provide an aggressive water massage. The floor air injectors (air jets) in this bathtub complete the full body massage experience. Rounding the tubs corners give a pleasing visual design to any bathroom. Note: Prices do not include freight.  Please call for pricing.  

Specification Sheets

C7248 Elite Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

OZONATOR

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$4,836.00

C6042 EOW Combination Bathtub

The elegant oval design of this tub will make it the centerpiece of your bathroom. Nine spa-grade jets will make it the centerpiece of your dreams, as they massage away your tension and worries. The three back jets are recessed for extra comfort, while all of them are fully adjustable for pressure and direction. We even include a free pulsating jet that can be changed out for any of the jets quickly and easily. Two arm rests are built in for your comfort, and the top deck is sloped to direct water down into the tub well to prevent overfill. Its clean, elegant design will add beauty to any bathroom, and its solid construction will last a lifetime. We guarantee it. Note: Prices do not include freight.  Please call for pricing.  

Specification Sheets

C6042 EOW Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

OZONATOR

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,222.00

C6042 GW Combination Bathtub

A popular jacuzzi style one person airbath/whirlpool combination. Other available 60”x42” airbath/whirlpool models that Watertech manufactures have different features, water depths and shapes. They are the C6042 Elite, the C6042EOW (oval shaped) and the C6042SW. All C6042 models, except the C6042EOW, are rectangular in shape and can easily have a shower incorporated into the design. The C6042GW has two clear acrylic grab rails 1” in diameter and 9” in length, perfect for individuals that require some assistance getting in and out of the bathtub. Note: Prices do not include freight. Please call for pricing.  

Specification Sheets

C6042 GW Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

OZONATOR

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,211.00

C6043 Combination Bathtub

A great two person bathtub delivering a combination of both an air bath and a whirlpool bath. By adding 1” to the width of a standard 42” wide bathtub, we have created a spacious two person tub that doesn’t require excessive width in the bathroom. A narrow top deck, approximately 2” wide, allows the internal bathing to be enlarged significantly. Bathers sit facing each other and the tubs side drain insures that neither bather will be sitting on the drain. Each bather is provided three back jets and a foot jet. Note: Prices do not include freight. Please call for pricing.  

Specification Sheets

C6043 Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

OZONATOR

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,681.00

C7236 BW Combination Bathtub

This one person combination bath has arm rests and an area molded in the top deck for soap, conditioner, etc. This jacuzzi style bath has water jets in the wall of the tub and air jets in the floor. Two entirely different massage experiences for a total body massage. This tubs rectangular shape also allows a shower to be incorporated into the design. Other models available in 7236 dimensions are the oval shaped combo 7236EOW and the rectangular shaped C7236 Elite with our exclusive top overflow. Note: Prices do not include freight. Please call for pricing.  

Specification Sheets

C7236 BW Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

OZONATOR

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,130.00

C7248 Combination Bathtub

Two bathers sit side-by-side with two recessed back jets. Curved lumbar support, sculptured arm rests, soap dishes and full width acrylic headrest are beautifully designed into this bath. Note: Prices do not include freight.  Please call for pricing.  

Specification Sheets

C7248 Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

OZONATOR

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,685.00

C7338 Elite Combination Bathtub

The 7338 Elite combination tub has everything you could ask for in a new bathtub, and then some. Its oval shape appeals to classic design, but its spa-grade features provide modern luxuries. Get the classic style you want with all the amenities you crave. The 7338 Elite has 12 whirlpool spa jets. Six are recessed in the tub’s back wall and are arranged in a pattern that reaches key areas of your spine and back. Six more are placed strategically around the tub to surround the rest of your body with massaging jets. A three-speed controller lets you adjust the jet pressure, and each jet can be adjusted for direction as well. Seventeen air injectors create heated massaging air bubbles. The tub includes an interchangeable pulsating jet to further enhance your bathing experience. Seventeen air injectors fill the water with heated air bubbles. Its over six-foot length gives you plenty of room to stretch out, while the WaterTECH exclusive Top Overflow gives you plenty of depth to sink into. The deck of the tub is uniquely designed with a raised headrest for comfort and perimeter overflow channel to prevent spillage. Two built-in armrests and a textured floor provide added comfort and safety. Get the best in design and quality with WaterTECH’s 7338 Elite combination bathtub. Note: Prices do not include freight.  Please call for pricing.  

Specification Sheets

C7338 Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

OZONATOR

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$4,658.00

MADE IN AMERICA

WaterTech manufactures fine whirlpool bathtubs and jacuzzi style bathtubs in the USA. We also manufacture high quality regular bathtubs and air bathtubs. Any of our bathtubs can be accessorized with standard items or for a completely custom look, be sure to visit our accessories.

Contact information

Email: sales@watertechtn.com
Phone: 1-800-289-8827

Back to top
Contact us

We would love to help you answer all your questions. Please fill out the form below and we will get back to you ASAP or call us at: 1 (800) 289-8827.

Questions, issues or concerns? I'd love to help you!

Click ENTER to chat