<
Navigation

C7242 GW Combination Bathtub

‹Return to Previous Page
Description

Description

This traditional combination whirlpool/air bath fits most homes. The tubs rectangular shape allows it to be incorporated into a shower design. 9 water jets provide an aggressive hydrotherapy body massage with three stacked water jets to massage the back and spine. 18 air jets located in the floor provide a non-aggressive air massage. The C7242GW has a center-side drain. On combination baths all the water jets are fully directional and the jet’s scalloped face can be rotated allowing the bather to increase or decrease the water flow and pressure from each jet. A three speed control (high-medium-low) is standard on all combo baths giving the bather complete control of the water flow and pressure from all the water jets simultaneously.

For your comfort all back and neck jets are recessed in all Watertech whirlpools and combination bathtubs. The water lines on combo baths are rigid PVC, U.L. certified for 100% drainage assuring a clean and sanitary massage experience each and every time the bath is used. A free pulsating jet is provided with each combo bath and can be easily interchanged with any water jet in a matter of seconds. The pulsating jet is a feature usually found only in hot tubs and spas.

The measurements are 72” in length and 42 ” in width. The C7242GW combo bath, a combination air bath and whirlpool bath, has 18 watertight air injectors with 126 air ports and 9 water jets. Each injector has an internal check valve that insures water never enters any part of the air system (blower, air lines, or air manifold etc). We recommend anyone buying an air bath or combination air/whirlpool bath review and understand the differences between Watertech’s injector baths and other air baths that are manufactured by eliminating air injectors and simply drilling holes through the bottom of the tub into an unserviceable air channel under the tub. All combo baths have a blower powered air system and pump powered water system that can be operated independent of each other or used at the same time. The bather gets to select from three massages – air, water or combination of air and water. Additional information can be found on our website or in our product catalogue. All Watertech combination baths are equipped with injectors (air jets) in the floor and hydrotherapy water jets in the walls of the bathtub, two entirely different massages that can be used separately or together.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “C7242 GW Combination Bathtub”

Specifications
Specification Sheets
Specifications
  • Size: 72" x 42"
  • FREE! Pulsating Jet - Interchangeable with any jet neck, back, foot, etc. ($55.00 Value)
  • Pump Size: 7 amp Lifetime Warranty
  • Blower Size: 8 Amp, Variable Speed, 300 Watt Heated Blower
  • Purge Cycle: Activates twenty minutes after bath is switched off. Dries lines, manifold and injectors
  • Electronic Controls
  • Air Injectors: 126 air ports from 18 injectors
  • Hydrotherapy Spa Jets: 9
  • Injectors have integral watertight check valves
  • Manifold System: Manifold contains check valve protection. Water never enters any part of the air system. Tub shown with optional polished brass injectors.
  • Min/Max gallons vary, depending on bather size
  • Includes on/off air switch
  • Includes 3 speed pressure controller (A $75 value)
  • All water lines are plumbed completely with rigid schedule 40 PVC pipe (no flex hose)
  • Shipping Weight: 162 lbs (price does not include shipping)
  • Tub shown with optional polished brass trim

Shipping & Receiving

Shipping

At WaterTech Whirlpools we ship our quality tubs across the United States using only the top freight lines to ensure your whirlpool tub gets to you on time and in the same condition as when it left our factory floor. 

The following are normal shipping times; please call for current shipping rates (subject to change).  Please note that shipping is NOT included in the price of each tub.  Regular delivery time is 3 weeks from the date we receive your order.

Our Quick Ship option allows your tub to leave our factory floor within 5 business days from the date we receive your order.   Please call 1-800-289-8827 for our Quick Ship service.

 

 

Precautions & Installation Tips

  • Do not lift or carry the whirlpool tub by the supply or return pipes - they could break or spring leaks.
  • You must install a mortar bed beneath your tub to meet code and warranty requirements.
  • An access opening large enough to service your pump must be installed to meet code requirements.
  • Do not frame your whirlpool tub enclosure until you have your tub on the job site.
  • Carpenters, plumbers, and tile installers should verify all dimensions to ensure that the tub enclosure is properly sized for your whirlpool tub.
  • Detailed installation instructions are available on the installation page of this site.
  • Re-test your whirlpool tub for leaks or construction damage before you enclose your tub.

 

Receiving

Reliable trucking (freight) companies have been selected by WaterTech Whirlpools to deliver each new Whirlpool Bath. WaterTech Whirlpools packages each bath individually to ensure safe delivery to each customer. The freight carrier will notify customer and schedule a delivery time after the bath leaves our manufacturing facility. Call WaterTech Whirlpools if you have any questions (i.e. price, product, technical, shipping etc.) Phone 1-800-289-8827, Fax: 423-926-6438 email at info@watertechtn.com.

INSPECTION AND CLAIMS PROCEDURE: Follow the steps below to eliminate any questions about who is responsible for visible or concealed damage that may have occurred in shipping. Examine the shipping box for signs of damage or mishandling, i.e. staples pulled loose, flaps unglued, punches to the box, severe indentations, or crushed corners. If the box is damaged, the delivery person and receiving person / Consignee must note the damage to the box on delivery paperwork before opening the box. Open the box and inspect the tub for damage. If damage is found, call WaterTech Whirlpools at 1-800-289-8827 before accepting tub. Minor defects such as scuffs, scratches, etc… can be easily taken care of by one of our service people. All issues need to be resolved before signing delivery paperwork.

CONCEALED DAMAGE: WaterTech Whirlpools allows the consignee / owner no more than 48 hours from time of receipt to inspect and report any concealed damage (i.e. leaks, broken pipes, etc…) or shortages of merchandise ordered (i.e. heater, drain, jet trim, etc…). Report concealed damage and shortage to Americas Best Whirlpools 1-800-289-8827.

FAILURE OF THE CONSIGNEE TO INSPECT AND REPORT ANY CONCEALED DAMAGE WITHIN THE 48 HOUR PERIOD PLACES FULL RESPONSIBILITY FOR ANY CONCEALED DAMAGE ON THE CONSIGNEE.

PRE-TEST YOUR TUB: You must pretest your tub for leaks within 48 hours of receipt. WaterTech Whirlpools tubs go through rigorous testing for plumbing leaks and proper operation prior to shipping, but as a secondary precaution, the tub must be re-tested for leaks and proper operation within the allotted 48 hours and before installation. Test your tub in a location that will not be damaged by spilled water such as a basement, driveway, or a garage. Pre-testing your tub allows you to find any plumbing connections that might have worked loose during shipping.

HOW TO PRE-TEST YOUR TUB: Place your tub on a firm flat surface, make sure top of tub is level in all directions. Tape over the drain. Fill with water to 1 or 2 inches above the highest jet. Plug the motor into a GFCI protected outlet, and with the pump running, check all pipes and fittings for moisture. If no leaks are found, remove tape over drain and check for proper drainage. If all is correct, you may continue the Installation process.

IF ANY PROBLEMS ARE DISCOVERED DO NOT INSTALL THE TUB UNTIL YOU HAVE SPOKEN WITH A WATERTECH WHIRLPOOLS REPRESENTATIVE AT 1-800-289-8827

Related Products

C6032 BW Combination Bathtub

This is the perfect tub to upgrade your bathroom from so-so to top-notch. It will fit the standard bathtub space, so you won’t sacrifice space when you choose the 6032 BW. Its shape and dimensions make it a great choice for a tub/shower combination. Seven hydrotherapy jets provide spa luxury and are fully adjustable for direction and pressure. A free pulsating jet come with the tub and is interchangeable with any jet in the tub. A three-speed control comes standard and allows the pressure to be adjusted for low, medium, and high. The back jet is recessed for comfort, and two armrests and soap dishes are built-in. Nineteen air injectors provide the water with millions of tiny massaging bubbles. The tub shell is made of genuine Lucite acrylic that is scratch-resistant and easy to clean. Our steel-reinforced floor means the tub won’t sag or sink, and rigid PVC waterlines drain completely, so water stays clean and pure. A Watertech tub means long lasting quality and durability.  

Specification Sheets

C6032 BW Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$2,967.00

C6036 BW Combination Bathtub

This air bathtub has 27 air injectors to provide you with the ultimate spa bath. It’s slightly wider than most standard tubs, and the extra width is used to provide a top deck that will accommodate all your bathing accessories, like shampoo, conditioner, and body wash. Because of its rectangular shape, it’s ideal for a bathroom alcove with an overhead shower. Built-in armrests allow you to relax in comfort as you recline against the sloped back with three recessed air injectors to massage your back. Twenty-four more air injectors installed in the tub floor infuse the water This jetted combination tub has nine jets and 19 air injectors to provide you with the ultimate spa bath. It’s slightly wider than most standard tubs, and the extra width is used to provide a top deck that will accommodate all your bathing accessories, like shampoo, conditioner, and body wash. Because of its rectangular shape, it’s ideal for a bathroom alcove with an overhead shower. Built-in armrests allow you to relax in comfort as you recline against the sloped back with three recessed jets to massage your back. Four jets, two on each side, massage your hips and legs, and two jets reach your feet. Air injectors in the tub floor add tiny, heated massaging bubbles to the mix for the perfect blend of soft and deep tissue massage. This tub is built to last—it’s made from genuine scratch-resistant Lucite acrylic; it has a steel-reinforced tub floor and motor mount. Rigid hand-formed PVC pipe ensures 100% water drainage, so your lines stay clean. We’ve built a tub that will tuck nicely into your bathroom and provide you with the luxury bathing experience you crave. Note: Prices do not include freight.  Please call for pricing.  

Specification Sheets

C6036 BW Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,096.00

C6043 Combination Bathtub

A great two person bathtub delivering a combination of both an air bath and a whirlpool bath. By adding 1” to the width of a standard 42” wide bathtub, we have created a spacious two person tub that doesn’t require excessive width in the bathroom. A narrow top deck, approximately 2” wide, allows the internal bathing to be enlarged significantly. Bathers sit facing each other and the tubs side drain insures that neither bather will be sitting on the drain. Each bather is provided three back jets and a foot jet. Note: Prices do not include freight. Please call for pricing.  

Specification Sheets

C6043 Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,681.00

C6048 Combination Bathtub

A classic design that allows two bathers to sit side by side. 10 water jets provide a high pressure water massage of the back and body. Sculptured arm rests are designed into the tub for a comfortable place to put your arms while enjoying a relaxing full body massage. The C6048 is rectangular in shape making it easy to add a shower, if so desired. Air jets (injectors) placed in the floor provide a soft tissue, non-aggressive massage of the hips, legs, knees, and feet. Note: Prices do not include freight. Please call for pricing.  

Specification Sheets

C6048 Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,320.00

C7236 EOW Combination Bathtub

A luxurious one person bath with an extra large bathing area and extensive leg room. This oval design has water jets in the walls of the tub and air jets in the floor to provide entirely two different massage experiences. On combination baths all the water jets are fully directional and the jet’s scalloped face can be rotated allowing the bather to increase or decrease the water flow and pressure from each jet. A three speed control (high-medium-low) is standard on all combo baths giving the bather complete control of the water flow and pressure from all the water jets simultaneously. Note: Prices do not include freight.  Please call for pricing.  

Specification Sheets

C7236 EOW Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,302.00

C7242 EW Combination Bathtub

Beautiful oval design one person bathtub. Designed into this jacuzzi style combination air/whirlpool bath are two clear acrylic grab bars 1” in diameter and 10” in length useful for those who may need assistance getting in or out of the bathtub. Four back jets massage the bathers back while other water jets massage the body and soles of the feet. On combination baths all the water jets are fully directional and the jet’s scalloped face can be rotated allowing the bather to increase or decrease the water flow and pressure from each jet. Note: Prices do not include freight.  Please call for pricing.  

Specification Sheets

C7242 EW Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,603.00

C7242 SW Combination Bathtub

Wide tapered arm rests and a sculptured seating area cradle the bather in this C7242 SW combination bathtub. The large deck area is ideal for faucet, soap, candle, soap, etc. The tubs rectangular shape is perfect for those wanting to incorporate a shower over the tub. Three water jets massage the back area with additional jets to massage the rest of the body. The C7242SW also has air jets for a comfortable non-aggressive body massage. Note: Prices do not include freight.  Please call for pricing.    Specification Sheets C7242 SW Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,207.00

C7248 Combination Bathtub

Two bathers sit side-by-side with two recessed back jets. Curved lumbar support, sculptured arm rests, soap dishes and full width acrylic headrest are beautifully designed into this bath. Note: Prices do not include freight.  Please call for pricing.  

Specification Sheets

C7248 Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,685.00

C7254 Combination Bathtub

A beautiful and popular two-person whirlpool. Sculptured arm rests and pillows are part of this outstanding design. This tub includes eight jets for the entire body with back and neck jets recessed for added comfort. Watertech provides the ultimate bathing experience with the C7254 Combination whirlpool/air bathtub.  This quality bath provides a soft tissue massage from the air injectors located in the floor of the bathtub and high pressure joint and deep tissue massage from water jets located in the walls of the bathtub. Note: Prices do not include freight.  Please call for pricing.  

Specification Sheets

C7254 Specification Sheet Watertech-Installation-Booklet  
ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS
$3,713.00

C7441 Combination Bathtub

A beautiful hour glass shape with inward sloping deck area. A luxurious one person jacuzzi style bathtub where 6 water jets provide a high pressure massage to the back and neck. The lowest back jet is ideal for those wanting a lower lumbar massage. Additional water jets massage the body, legs and feet. Two arm rests allow the bather to stretch out comfortably, relax and enjoy a tension relieving hot water massage. Note: Prices do not include freight.  Please call for pricing.   

Specification Sheets

C7441 Specification Sheet Watertech-Installation-Booklet  

ELECTRIC HEATER

ELECTRIC HEATER

JET FINISHES

JET FINISHES

CUSTOM PUMP LOCATION

CUSTOM PUMP LOCATION

DRAIN OVERFLOW FINISHES

DRAIN OVERFLOW FINISHES

white

White

biscuit

Biscuit

biscuit

Bone

VIEW OPTIONAL COLORS

$3,836.00

MADE IN AMERICA

WaterTech manufactures fine whirlpool bathtubs and jacuzzi style bathtubs in the USA. We also manufacture high quality regular bathtubs and air bathtubs. Any of our bathtubs can be accessorized with standard items or for a completely custom look, be sure to visit our accessories.

Contact information

Email: sales@watertechtn.com
Phone: 1-800-289-8827

Back to top
Contact us

We would love to help you answer all your questions. Please fill out the form below and we will get back to you ASAP or call us at: 1 (800) 289-8827.

Questions, issues or concerns? I'd love to help you!

Click ENTER to chat